Question about kawasaki 2005 Prairie 360

1 Answer

Carb seems to be the issue

My ATV sat for a while then it wouldn't run. I cleaned the carb and it will start and run, but as soon as I touch the throttle it stalls. Also, it will run for several minutes and then stall.

Posted by on

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 14 Answers

There is a high and low jets in the carb need to remove both and clean blow threw the port on the jet holes to make sure there is no blockage

Posted on Dec 29, 2013

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Polaris 4wd 6x6 magnum. Just replaced the carb with a factory new one. Starts fine , but dies as soon as I touch the throttle.


What was wrong with the old carburetor?? I have been working on motorcycles and ATV's for 40+ years... only replaced 5 carburetors..they were broken/damaged by the owner trying to "fix them" or corrosion damage from leaving gas in them for years...
It still sounds like you have a fuel delivery issue...check all your hoses..
get one of these... it will serve you well ...

Polaris atv manuals

Polaris ATV repair manuals

Sep 17, 2017 | ATVs

1 Answer

How to Adjust idle circuit? Why does it start, but does not keep running.


2 stroke or 4? if 2 stroke definitely jetted wrong choking makes it rich tells me your main jet is too lean (smaller hole) you need to pull carb check jets for plugage clean jets write down numbers check dealer for correct jet size for your elevation if 4 stroke back fire thru carb indicates timing is off or bad intake valves or cam lobe worn

Oct 03, 2016 | ATVs

1 Answer

I have a 2003 polaris/330 trail boss with a fuel problem. i had carb rebuilt at a shop .cleaned, new needle & seat installed. new plug, carb vent/ equalizer cleaned, tank vent clean. starts fine, runs...


there's a vent on the carb they might've have missed, the line could be clogged. insects and mud get in them. plus it could be the petcock on the tank. take it out and make sure the screens, are cleaned etc.

Apr 21, 2017 | Polaris ATV

1 Answer

2002 artic cat 350


Has this ATV been sitting for a while? actually sounds like a fuel delivery system issue. make sure you have gas freely flowing to the carb.. then have a professional clean and set the carb. You are actually waiting in the carb to fill with gas during this time... the needle and seat need cleaning or replacing

Mar 24, 2014 | ATVs

1 Answer

Carb Issues


It's winter time...so cold weather is present and you'll have to use the choke. Are you using the choke?

Dec 29, 2013 | kawasaki 2005 Prairie 360

1 Answer

ATV Yamaha Grizzly 350 2007 will not start


Sounds like it has sat for a while and your jets are gummed in the carb there is a you tube video on this topic that will walk you through the repair other thing to check turn fuel tank valve to off position remove fuel hose at carb slowly turn valve on to see if you have fuel to the carb if there is fuel there turn valve off install hose back on carb remove remove hose at tank valve now on the bottom of the carb you will see a plug or screw loosen this ( there may be fuel running out of drain hose have a bucket to catch fuel) now on the hose at tank valve blow threw it ( do not use air compressor) air should blow freely if it dose not your needle valve is stuck and there is no fuel getting to the carb or stuck float or a hole in the float and full of fuel

Dec 23, 2013 | Yamaha 2007 Grizzly 350 Auto 4x4

2 Answers

Run good at idle but pop and spits at full run


make sure the gap in the spark plug is correct and clean.make sure carb is clean and has proper suction aka loose carb hoses bolts exc.ohhh and if you take the carb off definitely check the reeds while your at it

Dec 08, 2012 | RTO 200cc Full Size Four Wheeler ATV

1 Answer

1996 Polaris Sportsman 400 Will Not Start


If your atv has been sitting this long, the carb is probably stopped up internally... take the carb to a qualified professional and have it cleaned and set...(take a few pictures so you know where all the hoses re-attach)

ALL it takes for an engine to run is:
1. A timed spark
2. Adequate compression
3. Proper fuel/air ratio delivered

Aug 12, 2017 | Polaris ATV

1 Answer

Polaris 325 magnum spark plug change


The spark plug is on the left side (shifter) of the head,,..?/ this is August.. if the atv has been sitting the carb may need a qualified professional to clean it again.. Replace the spark plug before you squirt anything in the engine...

Jul 27, 2017 | Polaris ATV

1 Answer

1998 Polaris Explorer 300. Could you please tell me what the compression reading should be? I turns over but wont start, will start if boosted but dies out when you let off the gas. Before all this started...


Hey Ang,
Just from what you have told us... this seems a little more complicated than simple... Does it only run wide open? ...Has anyone been "working" on this atv...?? IF they have been working on the carb, you may have put the slide in incorrectly...there is a groove down the side of the slide and a pin in the carb the groove runs on...
1. Compression should be 120PSI...or more, with the the throttle held wide open and kicked over 5-8 times.. The carb may need to be professionally cleaned and set...(take it to a qualified professional)...do this and reply to me..

Jun 23, 2017 | Polaris ATV

Not finding what you are looking for?
kawasaki 2005 Prairie 360 Logo

Related Topics:

419 people viewed this question

Ask a Question

Usually answered in minutes!

Top kawasaki ATVs Experts

yadayada
yadayada

Level 3 Expert

76846 Answers

Lawrence Oravetz

Level 3 Expert

9771 Answers

Glenn Smart
Glenn Smart

Level 3 Expert

818 Answers

Are you a kawasaki ATV Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...