Question about Yamaha 2004 Kodiak 400 Auto 4x4

Open Question

Yahama 400 kodiak 2001 no fire

Have put new coil cdi box stator an rectifier still no fire

Posted by Anonymous on

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My 1999 yahama big bear 4- wheeler wont fire, replaced all electric parts 4 cdi boxes and still wont fire can u help


are you getting anything at all?.....you could check your ground wire(s) to make sure they have good contact on the bare frame metal

Aug 30, 2017 | Yamaha 2005 Big Bear 400 4x4

1 Answer

Have a 1994 Kodiak 400 and have no fire to coil and no spark what do you think that is


It is most likely gonna be the cdi inside the motor. Those are famous for going out. It's not a bad change tho. The part is about 250 dollars and you'll need a new gasket and oil. And really that's all.

Oct 22, 2016 | Yamaha 2004 Kodiak 400 Auto 4x4

1 Answer

No spark. How do I check stator?


It is most likely not the stator
it is most likely the CDI box (black box) however to check the stator there are two or three yellow wires comming out of the stator check each of the wires with a ohm meter for continuity if any goes to ground the stator is bad but most likely it is the CDI box

Jul 23, 2014 | Yamaha 2006 Kodiak 450 Auto 4x4 Special...

1 Answer

Kodiak wont start


Run a compression test (3-5 seconds) , with throttle closed, then repeat with throttle open. Should be around 100 psi closed and 125+ with it open. This will give you more direction.

Jul 09, 2014 | ATVs

1 Answer

Cdi problems


Wiring problem.

Jun 11, 2014 | ATVs

1 Answer

50cc apache quad spark problems


Could be the CDI. Check the stator and pickup coil specs with a multimeter first.

Nov 17, 2013 | ATVs

1 Answer

I have a 2003 polaris trailblazer 400. the oiler stopped working and fouled up my piston. I got it rebored and new piston. after that job was done i tried to start it. would not start. found that i had no...


fyi, something to watch out for on those is bad crank seals. will allow a lot of air in and cause the engine self destruct. before the cdi try simpler things like coil and making sure all the wiring is right. good pickup coil.

May 31, 2017 | Polaris ATV

Not finding what you are looking for?
Yamaha 2004 Kodiak 400 Auto 4x4 Logo

Related Topics:

28 people viewed this question

Ask a Question

Usually answered in minutes!

Top Yamaha ATVs Experts

 Scott Tx
Scott Tx

Level 2 Expert

552 Answers

Wayne McNeil

Level 2 Expert

168 Answers

yadayada
yadayada

Level 3 Expert

76848 Answers

Are you a Yamaha ATV Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...