Question about Yamaha 2004 Blaster Base

Open Question

How to adjust air flow on a yamaha blaster - Yamaha 2004 Blaster Base

Posted by Anonymous on

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My 2000 Yamaha blaster 200 runs good at half throttle but bogs after half throttle


check for air leaks around the air filter and/or clean the carb

Dec 09, 2016 | ATVs

1 Answer

My 2005 Yamaha Blaster will crank and idle for 1/2 hour or a little more then it will just stalls try and restart it will not start it appears that after it cools down it will start up again


Check that the breather in the fuel cap is still working. The breather has a hose with a one way valve.
You should be able to blow air in but not out. I hope that you are moving during that 1/2 hour as these motors require air flow for cooling.

Apr 14, 2015 | Yamaha 2005 Blaster Base

1 Answer

Howdy.I have a 2005 yamaha blaster.Low hours,good spark and freesh fuel.Fired it up the other day and was fine for about 5 min.Then it seemed to loose power then died.I checked fo fuel and spark , bot


the crankcase is filled with fuel from a leaking carburetor float (would be LOTSSSSS of smoke) OR Bad crankcase seal and its sucking in air, bad reed cage area seal, exhaust plugged up!

May 05, 2014 | Yamaha 2005 Blaster Base

1 Answer

How to adjust the carburetor on a yamaha YZF450R 2006


what are you trying to adjust? idle, air, fuel?? refer to shop manual for specific settings

Mar 03, 2014 | Yamaha 2006 YFZ 450 Bill Ballance Edition

1 Answer

Atv big bear 350 won't idle after cleaning


sounds like your mixture was leaned out because ur filter was cloged up ...making it run rich so was adjusted by screwing air screw out, now uv cleaned it, adjust it to make mixture richer by screwing back in until runs smotherly

Sep 08, 2013 | K and N Yamaha Big Bear Yfm350fw Air...

1 Answer

How do u adjust the throttle and fine tune carb also how do you know that injection pump that mixes with oil is working


a lot of people that take these apart put them back together backwards. make sure it is right. most of those carbs are not adjustable other than the jet itself. make sure your fuel tank is clean and fuel lines are clear/ fuel filters are clear or new.

Aug 15, 2013 | Yamaha 2004 Blaster Base

1 Answer

Blaster stuck on full throttle


I would check the plastic heat isolator between the carb and cylinder head for leak.

Jul 07, 2013 | Yamaha 2004 Blaster Base

2 Answers

1989 yamaha blaster does not stay on


mcdevito75 here, Sounds like a lack of spark to the spark plugs to me, have a shop check it out for you, menwhlie you can check all around your Yamaha blaster for any wires loose or not connected.

May 24, 2010 | RTO 200cc Full Size Four Wheeler ATV

Not finding what you are looking for?
Yamaha 2004 Blaster Base Logo

Related Topics:

12 people viewed this question

Ask a Question

Usually answered in minutes!

Top Yamaha ATVs Experts

yadayada
yadayada

Level 3 Expert

75797 Answers

 Scott Tx
Scott Tx

Level 2 Expert

520 Answers

Noel Bennett

Level 1 Expert

24 Answers

Are you a Yamaha ATV Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...