Speedo head display not working 2003 polaris 700 atv sportsman

How to replace starter, Polaris Sportsman - YouTube

DIY How to Replace a Polaris Sportsman ATV Starter Motor No Clutch Removal Required - YouTube

How to replace your starter on a Polaris 400/500/700 Sportsman - YouTube

Seat Removal - Polaris Sportsman 550 XP Owner's Manual [Page 90] ' ManualsLib

Polaris 500 Sportsman Starter Replacement - YouTube

got a loose wire connector . check by jiggling all connectors in harness. good luck. dont give up prolly the grounding circuit.

There is a temperature sensor on the radiator.If that doesn't work check wiring.

not sure about that model but other polari I've worked on use electronic hubs to engage the four wheel drive. check the wiring to the hubs or possibly a bad switch.

2004 Sportsman 700 AWD not working..... - Polaris ATV Forum

www.polarisatvforums.com > ... > ATV Repair and Maintenance
Feb 18, 2013 - Go Back · Polaris ATV Forum > Polaris ATV Technical Discussions > ATV ... AWD wont engage. 2. The instrument / speedo works. 3. The AWD switch is ...Polaris ATV Junkie! .... four wheel drive not working polaris sportsman. Won't go into 4 wheel drive
Feb 1, 2013
4 wheel drive not working
Nov 13, 2011
2004 700, 4WD engages by itself
Oct 28, 2011
4wd is stuck on
Dec 3, 2009
More results from www.polarisatvforums.c

check earth cable/s
dont jump start with a running car engine,it will send too many volts.
do you have spark?

try this first right beside the reverse button u will see 2 sets of wires clipped into the control be careful and pull these 2 apart u will see they will be all corroded up clean them up and dielectric them see if that works its a easy fix maybe

if that doesnt work try this...

I replaced the speed sensor, got my speedo operation back, no more intermittent 4x4 issues, and no more stalling in reverse! It's actually quite annoying how many things are tied into that one sensor. Makes for a frustrating trip out of the bush if it starts acting up on the trail (like mine did). Good luck with your repairs!

I'd suspect a dirty connection somewhere or a bad fuse. maybe the keyswitch?

you ever change the hub fluid?