2012 arctic cat 350 will not fire after repeated starting precedure
There are many things it could be but I think someone will need more information. I assume the battery is good. Is it turning the engine over ok? did you recently put new gas in it? Could there be fuel problem? fresh gas? Is it flooded? If so, let it set for a while and try again being careful not to give it too much gas. Do you know if it's getting spark? Pull a spark plug, leave it plugged in and place it close to the block, check for spark but be careful, it can bite hard if holding it in your hand. Maybe spray a "little" starting fluid into the air intake. Does it attempt to start? Do you hear any clicking from the starter solenoid? Have you tried to jump out the solenoid? Make sure you keep a trickle charger on your battery, with all this testing, you can run it down. Tell us what you've tried along with any other symptoms. More information is better. Don't use too much starting fluid or too often, it's extremely flammable but doesn't provide enough lubrication.
×