Question about Yamaha 2004 Warrior Base

Open Question

1999 bear tracker 250 how to check transmission fluid

Posted by Anonymous on

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

No start on bear tracker 250 just backfires


then the timing is not set properly .

Jun 22, 2016 | ATVs

1 Answer

2001 Yamaha Bear Tracker. How can I set timing?


Hi Ryan , the timing gear marks will possible not mark hundred percent when timing chain is worn much . the tensioner should be inside when you check the valve timing .

May 02, 2016 | ATVs

1 Answer

Yamaha Timberwolf. How can I find model number to order parts


If you can tell me your vin - or your year I can tell you what model you have. But - if you go onto any parts site - such as cheapcycle.com or partsmonster - you name it - you won't need your 'model' # - just your year. You'd click - Yamaha OEM Parts, then ATV then Year - 1992 - 1998 was the Timberwolf - a lot of parts from the 99 - 04 Bear Tracker will work (just about only changed the plastics and carb in 99 - 04) same engine/transmission/rear end, etc. the brakes also went from drum to disc - but you'd click on the year - and then look - the timberwolf will be right there the 1992 - 1998 Yamaha Timberwolf 250 - I can't remember if they offered a timberwolf 350. If you can tell me the vin or year - like I said - I'll reply with your exact model # - but you can buy and order most parts just by model name and year 95 Timberwolf.

Dec 29, 2015 | ATVs

1 Answer

Yamaha Timberwolf. How do I find model number to order parts?


I apologize - my answer to the previous question didn't really clarify your actual question - Your VIN can be found along the frame rail - left hand side - about a foot or so ahead of your left foot guard -

26028714-jbdqfs5232kzbw0rj532ox50-2-0.png

If it's still there - your model number is here:26028714-jbdqfs5232kzbw0rj532ox50-2-2.png

If you can read your VIN - and here's a tip to know you're getting the whole number and it's not rusted away a digit; your second digit should be a (Y) - if you write down your VIN, second digit is Y so you know the placement is right - the 10th digit is the year. And here are the breakdowns for that 10th Digit:

(For all Yamahas - not just the Timberwolf):
88 - J, 89 - K, 90 - L, 91 - M, 92 - N, 93 - P, 94 - R, 95 - S, 96 - T, 97 - V, 98 - W, 99 - X, 2000 - Y, 01 - 1, 02 - 2, 03 - 3

From 1992 - 1998 the Yamaha 250 4-stroke, shaft drive, trail bike was the Timberwolf.

From 1999 - 2004 the Yamaha 250 4-stroke, shaft drive, trail bike was the Bear Tracker.

*****SAME ENGINE, SAME TRANSMISSION, SAME REAR END, TIRE SIZE, PULL START - THINGS THEY DEFINITELY CHANGED IN 1999 WHEN THEY STARTED CALLING THEM THE BEAR TRACKER: - PLASTICS BECAME A LITTLE LONGER I BELIEVE; AND THE SEAT WITHOUT A DOUBT BECAME LONGER. THE CARB WENT TO A CONSTANT VACUUM - INSTEAD OF THE SLIDE CARB WHERE THE THROTTLE CABLE WENT THROUGH THE CAP LIKE THE TIMBERWOLF. HARD TO REMEMBER - BUT I THINK THE TIMING CHAIN TENSIONER BECAME UNADJUSTABLE - AND NOT MUCH ELSE CHANGED. IN 99 THEY EVEN KEPT THE BRAKING SYSTEM THE SAME. SOMETIME AROUND 2000, 01 OR SO THE BRAKE SYSTEM CHANGED FOR THE FRONT WHEN YAMAHA WENT TO DISC BRAKES. HOPE THIS HELPS. ANYTHING ELSE YOU NEED TO KNOW ABOUT YOUR TIMBERWOLF JUST LET ME KNOW - I'VE OWNED, REBUILT, BOUGHT, SOLD, TRADED A TON - I'VE CURRENTLY GOT A 99 BEAR TRACKER THAT IS THE MOST DEPENDABLE 250 4 STROKE I'VE EVER OWNED AND A 1996 YAMAHA WOLVERINE 350 4X4 - I'VE REBUILT THEM FROM THE BOTTOM TO THE TOP. THOSE BIKES ARE GOLDEN IF YOU TAKE CARE OF THEM AND DO A LITTLE ROUTINE MAINTENANCE. ALL THE BEST - JUSTIN MCCARTNEY

THE 99 I MENTIONED THAT I STILL HAVE:
26028714-jbdqfs5232kzbw0rj532ox50-2-5.jpg

A 98 I BOUGHT WITH THE ENGINE IN A MILK CRATE THAT I BOUGHT, REBUILT & SOLD:
26028714-jbdqfs5232kzbw0rj532ox50-2-9.png

A 2004 I BOUGHT, REBUILT AND SOLD:
26028714-jbdqfs5232kzbw0rj532ox50-2-14.jpg
All the best - let me know if you're ever in a jam with yours; not too much I haven't seen, fixed or had to deal with.

Dec 29, 2015 | ATVs

1 Answer

Testing the stator what measurement should I get from the black wire to white?


More than likely, sorry to say - probably not. I'd be really careful too, because if something goes haywire, you're risking your rectifier and cdi going bad. If you can tell me your make and model - if I have the specs I'll send them to you - but basically, when you check the stator - it's a resistance reading that you're looking for. For example: 99-04 Yamaha Bear Tracker - from white to black resistance is .45 - .55 ohms at 68 degrees f/20 degrees c

Dec 27, 2015 | ATVs

1 Answer

Have 300 4x4 can it be replaced with a 250 from a 2x4 and be able to keep it a 4x4 both are a 2002 with the motors in the rear


there is every possibility as there is only a 50cc's difference in engines
check that mount points and where it bolts onto the transmission

Oct 08, 2015 | ATVs

1 Answer

99 bear tracker


ok did you check for a good engine ground

Jun 09, 2014 | ATVs

1 Answer

How do i check oil level in 2000 artic cat 250 2 x 4 atv


1600ml is the Arctic Cat recommended amount BUT if you check the KYMCO manual (the '06 250 is a kymco made for AC) it says the capacity is 1600ml but when you change oil it is 1400ml. This might explain why my oil level always seems higher than it should be. You can check the level with the site glass on the side.

Also on the 250, you also have to change transmission fluid separately. It uses the gear oil NOT engine oil.

May 09, 2014 | ATVs

Not finding what you are looking for?
Yamaha 2004 Warrior Base Logo

Related Topics:

67 people viewed this question

Ask a Question

Usually answered in minutes!

Top Yamaha ATVs Experts

 Scott Tx
Scott Tx

Level 2 Expert

525 Answers

Wayne McNeil

Level 2 Expert

168 Answers

yadayada
yadayada

Level 3 Expert

76164 Answers

Are you a Yamaha ATV Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...