Question about Yamaha 2004 Blaster Base

Open Question

What kind of oil do i put in yamaha blaster 03 gear box

Posted by Anonymous on

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My blaster runs good but once it gets hot it revs up and wont stop i cant stop it with the run switch or the key i block the air to turn it off i put a new plug in it it has the oil pump off i mix the gas...


Sounds like an air leak... either at the base gasket or the reed valve gasket. or the carb/reed intake boot...MAYBE THE HEAD GASKET...

...AND ... get a qualified pro to look at your carb..tell him which parts you replaced...

Aug 06, 2017 | Yamaha 2004 Blaster Base

1 Answer

How do u adjust the throttle and fine tune carb also how do you know that injection pump that mixes with oil is working


a lot of people that take these apart put them back together backwards. make sure it is right. most of those carbs are not adjustable other than the jet itself. make sure your fuel tank is clean and fuel lines are clear/ fuel filters are clear or new.

If you need further help, reach me via phone at https://www.6ya.com/expert/ray_6d6dc1dfa6f18dc1

Aug 15, 2013 | Yamaha 2004 Blaster Base

3 Answers

My son was riding his 2004 blaster was having a blast but ran it for about 4 hours. When he went to ride it home ess than 5 blocks away it stalled and the kick start seized and won't puch down. In addition...


Sounds like you need a rebuild. Dont use cheap china parts, go online to http://www.amazon.com/Wiseco-PK1089-2-Stroke-Piston-Top-End/dp/B0050FYN4Y/ref=sr_1_sc_2?ie=UTF8&qid=1420937950&sr=8-2-spell&keywords=yamaha+blaster+wise+co And get this. This should be everything you need to rebuild it. Now you need to MIX your oil. Not use the tank. Google blaster oil tank bypass and just remove the tank as it can tear up the engine badly. The oil pump can send shards of plastic into the crank and cause it to fail. Once you have done this, You can have the engine built, mix the oil 32:1 and insert into the gas tank. After this is all complete it should all be running even smoother then before. For any other help go to www.Blasterforum.com

Aug 08, 2013 | Yamaha 2004 Blaster Base

1 Answer

Blaster stuck on full throttle


I would check the plastic heat isolator between the carb and cylinder head for leak.

Jul 07, 2013 | Yamaha 2004 Blaster Base

1 Answer

Yamaha 660 WHAT KIND OF OIL DO I NEED FOR MY 660 YAMAHA RHINO


Semi-synthetic or Mineral oil, Don't use fully synthetic, it can make the cluch slip.

Jun 17, 2013 | Yamaha 2005 Rhino 660 Auto 4x4

1 Answer

I just bought a 1998 yamaha blaster atv. How much and what kind of oil goes in the gearbox? (the guy i got it from said use plain old 10w-30 oil) Does it use heavy weight gear oil? Transmission fluid?...


Use heavy duty SAE 80W-90 gear oil

Engine oil does work but the oil will not last as long nor will it protect the bearing's/gear's as well as gear oil. Thick dif oil can work to.
Also the gear box is should be sealed.

Oct 23, 2017 | Yamaha 2004 Blaster Base

Not finding what you are looking for?
Yamaha 2004 Blaster Base Logo

Related Topics:

41 people viewed this question

Ask a Question

Usually answered in minutes!

Top Yamaha ATVs Experts

 Scott Tx
Scott Tx

Level 2 Expert

598 Answers

Wayne McNeil

Level 2 Expert

168 Answers

yadayada
yadayada

Level 3 Expert

80608 Answers

Are you a Yamaha ATV Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...