K and N Yamaha Big Bear Yfm350fw Air Filter Logo

Related Topics:

A
Anonymous Posted on Nov 28, 2012

How to adjust carburator on big bear 400

Throughly cleaned carb adj valves pipe is glowing red backfires and misses ran the pilot jet out 1 1/2 what do i do please help i need it in a bad way tightend the boot on the carb engine side even put a new clamp on cant tell if its missing or backfireing through the carb does backfire through tail pipe was backfireing through carb for shure before i messed with the intake boot

1 Related Answer

Anonymous

  • 12 Answers
  • Posted on Nov 21, 2010

SOURCE: Why is my 2003 Yamaha

carb is ajusted to lean it needs to be richend the reason for the pipe glowing is its running hot due to the fact the carb is to lean discontinue use or you might burn up the motor!

Ad

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
1answer

2002 Yamaha Kodiak 400 will not hold low idle.

get a colortune tool.it shows how your firing.read instructions that come with,so simple to tune carb in with.sounds like pilot out of adjustment.could also have a leak in ur carb boot or head.take a torch without lighting open valve with motor running run torch around gaskets and front of carb boot listen for change in motor.if it gets higher rev uve found a leak.
0helpful
1answer

No start on bear tracker 250 just backfires

The timing is not adjustable. I would start with a clean air filter, clean carb, good spark plug, check and make sure that your cam timing matches your flywheel.
Jun 22, 2016 • ATVs
0helpful
2answers

Have 2000 artic cat 400 that run half choke but when give it gas spudders and backfires.

take carburator off take float bowl off carefuly not to lose parts
it has two jets one big one small remove and clean count turns as you remove replace the same turns
Dec 30, 2014 • ATVs
0helpful
1answer

What are the carb adjustment for a 98 Yamaha Big Bear 350cc atv

http://www.partzilla.com/parts/search/Yamaha/ATV/1998/BIG+BEAR+4WD+-+YFM350FWBKC/CARBURETOR/parts.html this page shows the carb all pieces including air mixture pilot and main jets
Oct 07, 2014 • ATVs
0helpful
2answers

High Idle when we get the 70cc ATV running

Pilot jet may be t o small or your air screw isn't adjusted right try turning the air screw in all the way then turn out 1full turn test and adjust until it runs good if that doesn't fix it the pilot jet will need to be cleaned or brought up one size hope this will help you good luck

If you need further help, I’m available over the phone at https://www.6ya.com/expert/brandon_79b580f5a99c4386

0helpful
1answer
0helpful
1answer

02 Big Bear 400- Hi-idle & backfires while running. Tried cleaning carb & air filter, drained bowl & cleaned with carb cleaner. Could there be aproblem with the choke.

Sounds like the carb could use a cleaning and setting by a professional...install a new plug and a new air filter.. AFTER the professional carb cleaning and setting.,,do this and repost
Not finding what you are looking for?

1,696 views

Ask a Question

Usually answered in minutes!

Top K and N ATVs Experts

john h

Level 3 Expert

29494 Answers

Renee Knafel-Bullock

Level 3 Expert

404 Answers

ADMIN Andrew
ADMIN Andrew

Level 3 Expert

66963 Answers

Are you a K and N ATV Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...