Question about Yamaha 2007 Grizzly 450 Auto 4x4

Open Question

Need a 1999 yamaha grizzly wiring diagram? - Yamaha 2007 Grizzly 450 Auto 4x4

Posted by Anonymous on

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Why won't my grizzly 660 go into neutral so I can start my bike


K, Linkage probably needs adjusted.
Check the attached links,instruction and guides, Good luck
"I hope this helped you out, if so let me know by pressing the helpful button. Check out some of my other posts if you need more tips and info."

2006 GRIZZLY 660 MOD HELP and SHIFTER ISSUES
http://www.yamaha-motor.com/assets/service/manuals/2008/lit-11626-21-03_griz660_all_1498.pdf

Mar 20, 2016 | Yamaha 2004 Grizzly 660 Auto 4x4

1 Answer

Would you have a wiring diagram for a headlight switch ?


Hey Paul,
The best thing you can do is get a Clymer or factory service manual. This WILL be the BEST way to go!! I am a factory tech and I will always have a manual NEAR!

Dec 14, 2015 | Yamaha 2006 Grizzly 660 Auto 4x4 Special...

1 Answer

Engine dies as soon as I put in reverse and will not start in reverse.


Grizzly 125 stalls in reverse - Yamaha Grizzly ATV Forum

www.grizzlycentral.com > ... > Grizzly Engine & Transmission
Oct 18, 2013 - 13 posts My dad just bought a 125 and it stalls the instant u pit it in reverse. ... electrical sensor that will kill the engine if the brake isnt depressed when u go into reverse. so now i need to ..... yamaha grizzly 125 dies when put in reverse.

Sep 29, 2015 | ATVs

2 Answers

Why would my 660 grizzly pop in & out of forward gear, jus whines, jumpin in & Out ???


Grizzly 660 Shifting problem. - Yamaha Grizzly ATV Forum

www.grizzlycentral.com > ... > Grizzly Engine & TransmissionMar 12, 2012 - 4 posts This is a discussion on Grizzly 660 Shifting problem. within the Grizzly Engine ....2005 grizzly 660 gear position sensor problem.

Aug 17, 2015 | Yamaha 2005 Grizzly 660 Auto 4x4

1 Answer

1999 yamaha grizzly atv spec


Use a tape measure. Here is a conversion chart from millimeters to meters, .001" to feet.

Jul 01, 2014 | ATVs

1 Answer

How do you remove a stator coil cover on a 2009 Yamaha Grizzly 700 atv?


drian engine oil take side cover should be an 8m to 12m depending on the model... the stator might be attached to the cover or might have a mount holding it into place to the fly wheel

Nov 16, 2013 | Yamaha 2009 Grizzly 700 FI Auto 4x4 EPS

1 Answer

New Fan not coming on 2007 Yamaha Grizzly 450 Auto 4by4


make sure all your connections are hooked. and that no wires are damaged

Oct 05, 2013 | Yamaha 2007 Grizzly 450 Auto 4x4

1 Answer

Backfires when you try to rev up engine,


check fuel flow and check spark at spark plugs

According to an "ATV Rider" 2009 article, "When the Grizzly was introduced in 1998 as a 600cc machine, the top was blown right off the displacement wars of the time."
It was replaced in 2002 with Yamaha Grizzly 660, an even bigger engine derived from the well-established all-terrain vehicle (ATV) Yamaha Raptor 660R.
Grizzly's 660 cubic centimeter (cc), four-stroke, liquid-cooled single overhead camshaft, five-valve engine performs well in open country, but sometimes it causes serious problems for owners.
Before you call a Grizzly dealer, however, trying a few tricks in your garage can save you a lot of time and money.

Check the fuel level.
Locate the fuel meter indicator on top of the multifunction display.
If it does not work properly, open the fuel tank, and push the Yamaha 660 Grizzly side to side.
Ensure the fuel is not contaminated by water or rust.
If you have not driven your Grizzly 660 for a long time, drain the tank completely, and fill it with a fuel tank cleaner.

Check fuel hoses for cracks or leakage.
The hoses should be soft and simple to bend.
Replace those that show any sign of wear.

Check the compression.
Screw a compression tester into the spark plug hole, and press the electric starter button.
If no compression exists, contact a Yamaha dealer.
Wipe wet or dirty electrodes with a dry cloth.
The spark plug gap should be checked regularly

Correct the spark plug gap.
Measure the gap with a wire thickness gauge.
If necessary, adjust it to 0.8mm using a screwdriver or replace the spark plug.
Use only a Yamaha-specified spark plug.

Check the Yamaha 660 Grizzly's battery.
Operate its electric starter.
If the Grizzly starts quickly, then its battery is in good condition.
If the engine turns slowly, check the battery lead connections, and you may need to change the battery.
If the engine still does not eventually start, your Grizzly is beyond home repair.


Jul 23, 2013 | Yamaha 2005 Grizzly 660 Auto 4x4

Not finding what you are looking for?
Yamaha 2007 Grizzly 450 Auto 4x4 Logo

Related Topics:

34 people viewed this question

Ask a Question

Usually answered in minutes!

Top Yamaha ATVs Experts

yadayada
yadayada

Level 3 Expert

75066 Answers

 Scott Tx
Scott Tx

Level 2 Expert

516 Answers

Noel Bennett

Level 1 Expert

24 Answers

Are you a Yamaha ATV Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...